"Click Here!" to go back to Used Equipment Page 1

    This page continues our complete used inventory listings with paper folders, numbering machines, staplers, and assorted bindery equipment.  If you need further details, email us at budsgraphics@sbcglobal.net or contact by phone at 501-821-4579. Equipment leasing available.  We ship to all 50 states and also offer delivery, installation, and on-site training!

Paper Folders
 

bullet

Baum 714 XLT Airfeed Paper folder.  This used paper folder is in good running condition.  The airfeed design allows the operator to continuously load paper on the top of the paper stack while the vacuum wheel pulls paper from the bottom of that stack and into the fold rollers.  Fold paper at speeds up to 32,000 sheets per hour.  Features include front and side blowers in feed table, resetable total counter, and folding chart for fast plate setup.  Accepts a variety of paper sizes including 6"x9", 8.5"x11", 8.5"x14", 11"x17", 14"x20", and odd paper sizes.  Fold bond, cover, ncr, and coated paper stocks.  Fast setup chart for Z Fold, letter fold, half fold, engineering fold, double fold, and special size folds.  We have serviced and tested this machine and it is ready to deliver.  Comes with rolling stand and operator/parts manual.
Price: $3,600.00           Reconditioned Price $4,200.00 and includes new fold rollers, bearings, belts, etc. so the folder is like new.   Click on picture for larger view.







 

Stitchers & Staplers

bullet New Listing!  Interlake S3A 7/8" stitcher.  Interlake stitchers are  heavy duty machines.  They use a roll of wire to make a staple by cutting the wire to length, and forming it to the correct size staple for each job.  Adjustable from 2 sheets up to 7/8"" thick paper stock.  Great for stitching ticket books, booklets, header cards, bagged products, etc.  Includes a saddle table.  Comes with a new roll of stitching wire and an operation/parts manual.  Simple to setup and operate.  Requires standard 120 volt wall voltage.
"Click on picture for larger view"
Price: $3,495.00

30 day parts warranty
 
bullet Ready to ship!  Interlake model A 1/4" stitcher.  We have two in stock!  These heavy duty floor model stitchers have a metal table that can be adjusted for flat or saddle stapling/stitching depending on your job.  Stitchers use a roll of wire, cuts the wire to length, and forms the wire to the correct size staple for each job. 

The stitch length is adjustable for 2 sheets up to a 1/4" thick (+/-48 sheets 20# bond).  Great for corner stitching, side stitching, and center stitching for booklets.  Interlake stitchers are heavy duty and are easy to setup and operate.  They operate on standard 120 volt power.  Each stitcher includes a brand new spool of 25 gauge round wire that will turn out 53,000 staples.  Stitchers are cheaper to operate than staplers because of material costs.  These stitchers have been cleaned, serviced, and checked for proper operation.  Operation and parts manual included.  30 day parts warranty.   "Click on picture for larger view"
Price: $1,500.00 each
30 day parts warranty.
 
bullet New Listing!  Interlake S3A 3/4" stitcher.  This heavy duty stitcher uses a roll of wire, cuts the wire to length, and forms the wire to the correct size staple for each job.  Adjustable from 2 sheets up to 3/4" thick paper stock.  Great for stitching ticket books, booklets, header cards, bagged products, etc.  Includes an adjustable backstop with the flat table.  Comes with a 9"x21" flat table, a 6"x26" saddle table, new roll of stitching wire, and an operation/parts manual.  Simple to setup and operate.  Requires standard 120 volt wall voltage.
"Click on picture for larger view"
Price: $2,500.00


 
bulletWe have more floor model stitchers listed on the featured equipment page.  "Click HERE!"

Assorted Equipment

  1. 3M Power plate bender.  Table top model.  Like New!  $

     

  2. T-51 color-head parts/operation manuals Price: $27.50


  3.  

  4. NuArc 26-1K Metal Plate Exposure Unit.  1000 watt mercury vapor exposure unit.
    23"x27" vacuum frame area.  Click on the picture for a larger view.
    $600.00
     



  5.  


All other used equipment is listed on the Featured Equipment page.  Click on this link!
 

 

"Click Here" go back to
Used Equipment page 1

 

If your equipment is costing you time and money,  Call us at 1-501-821-4579 for immediate assistance and ask for Todd HastingsOr send an email to budsgraphics@sbcglobal.net

 
We are located in Arkansas.  We can deliver or ship anywhere in the USA.

WarrantyWe back each piece of equipment with a parts warranty.  Printers within the state of Arkansas get a 30 day labor warranty. 

Payment options:  Leasing  MasterCard    VISA    American Express    Discover
Company check    Cashiers Check
  PayPal